Circular Single scoring Saw Blade for coated board
The saw blade is used for single and stacked cut-offs of plain and veneer panels (such as chipboard, MDF and HDF). The optimized tooth profile improves the cutting quality, the stability is strong, the cutter head is more wear resistant and the cutting is more stable.
1.The imported steel plate has strong stability and the imported alloy is sharp and durable.
2.The price is competitive when compared with PCD saw blades
| Diameter(mm) | Bore | Kerf | Tooth Number | Tooth shape |
|
120 |
20 |
3.0-4.0 |
24 |
ATB |
|
120 |
22 |
3.0-4.0 |
24 |
ATB |
|
180 |
45 |
4.3-5.3 |
40 |
ATB |
|
180 |
45 |
4.7-5.7 |
40 |
ATB |
|
200 |
45 |
4.3-5.3 |
40 |
ATB |
|
200 |
75 |
4.3-5.3 |
40 |
ATB |
Saw blade maintenance
1. If the saw blade will not use immediately, it should be laid flat or hung with the inner hole. No other objects or footsteps should be stacked on the saw blade, and attention should be paid to moisture and rust prevention.
2. When the saw blade is no longer sharp and the cutting surface is rough, it must be re-sharpened in time. Grinding cannot change the original angle and destroy the dynamic balance.
3. The internal diameter correction and positioning hole processing of the saw blade must be carried out by the manufacturer. If the processing is poor, it will affect the product performance and may cause danger. In principle, the hole expansion cannot exceed the original diameter of 20mm, so as not to affect the balance of stress.
We have a wide range of TCT circular saw blades instock, the diameter can be from180mm to 355mm, with teeth between 24 to 90.
Just feel free to send us the size information, we will make quotation within 24 hours.
